# History

## Development

* FIX: NEXRAD Level 2 reader drops MSG_31 records when an LDM Compressed Record carries MSG_2 (RDA Status) alongside the 120 radials — ``NEXRADRecordFile.init_record`` hard-coded a 120-message stride; per ICD ``2620010J`` §7.3.4 the LDM holds "120 radial messages (type 31) plus 0 or more RDA Status messages (type 2)". Replace the synthetic mod-120 stride with a byte-walk that detects end-of-LDM by buffer length, with a recnum-position cache for ``get_data``'s per-moment replay ({issue}`376`, {pull}`377`) by [@aladinor](https://github.com/aladinor)
* FIX: ensure `to_cfradial2` correctly selects the default storage engine when none is provided, ({pull}`378`) by [@chfer](https://github.com/chfer)
* MNT: Add ``cfradial1_sgp_file`` session fixture and refactor 8 tests in ``test_util.py``/``test_accessors.py`` to share it instead of inlining ``DATASETS.fetch("sample_sgp_data.nc")``. Fixture returns the filename so each test opens its own DataTree, avoiding cross-test mutation ({issue}`346`, {pull}`347`) by [@aladinor](https://github.com/aladinor)
* FIX: IRIS reader rotates the first-loaded moment in each sweep by 1 ray — ``IrisRawFile._get_ray_record_offsets_and_data`` initialised ``j = -1`` so the first matching ray of the first-loaded moment was written to ``raw_data[-1]``; affects files without ``DB_XHDR`` (data-type bit 0) where ``DB_DBT`` becomes the rotated moment ({issue}`357`, {pull}`375`) by [@aladinor](https://github.com/aladinor)
* DOC: Add projection comparison and cartopy map examples to ``Georeference_TargetCRS`` notebook by [@syedhamidali](https://github.com/syedhamidali)
* DOC: Add full-form descriptions for all supported radar formats in README.md by [@syedhamidali](https://github.com/syedhamidali)
* ADD: India Meteorological Department (IMD) radar NetCDF reader (``IMDBackendEntrypoint``, ``open_imd_datatree``). IMD stores one sweep per file; ``open_imd_datatree`` accepts a single file or a list of files to assemble a multi-sweep volume ({issue}`368`, {pull}`367`) by [@syedhamidali](https://github.com/syedhamidali)
* FIX: Preserve CfRadial metadata groups during CfRadial1/CfRadial2 transforms, allow ``to_cfradial2`` to reopen root-only ``engine="cfradial1"`` datasets, and normalize sweep metadata after ``map_over_sweeps`` operations so filtered volumes can be exported to CfRadial1 again ({issue}`254`, {issue}`322`) by [@syedhamidali](https://github.com/syedhamidali)
* ENH: Expose ``target_crs`` on ``.xradar.georeference()`` accessor for DataArray, Dataset and DataTree, enabling reprojection via e.g. ``radar.xradar.georeference(target_crs=4326)`` ({issue}`243`) by [@syedhamidali](https://github.com/syedhamidali)
* FIX: set ``id-token: write`` in CI testpypi publisher for trusted publishing ({issue}`364`) by [@aladinor](https://github.com/aladinor), ({pull}`372` ) by [@kmuehlbauer](https://github.com/kmuehlbauer)

## 0.12.0 (2026-04-21)

* MNT: Unpin xarray, require ``xarray >= 2026.4.0`` in ``requirements.txt``, ``environment.yml``, ``ci/unittests.yml``, and ``ci/notebooktests.yml`` by [@aladinor](https://github.com/aladinor)
* MNT: Clarify contributor, team-member, and maintainer roles in the contributing guide, including the pathway to greater project involvement ({issue}`341`) by [@kmuehlbauer](https://github.com/kmuehlbauer), ({pull}`354`) by [@syedhamidali](https://github.com/syedhamidali)
* FIX: ``open_nexradlevel2_datatree`` keeps sweeps with interior sweep-index gaps — derive sweep names from actual indices in ``nex.data`` instead of ``range(len(...))`` so upstream-dropped interior cuts (e.g. ``[0..9, 11]``) no longer raise ``KeyError`` ({issue}`361`, {pull}`362`) by [@aladinor](https://github.com/aladinor)
* ADD: ``open_cfradial2_datatree`` reader with grouped CfRadial2 compatibility normalization for common FM301/CfRadial2 naming differences ({issue}`93`, {issue}`287`), ({pull}`349`) by [@syedhamidali](https://github.com/syedhamidali)
* ENH: Move station coordinates (``latitude``, ``longitude``, ``altitude``) to root node as coordinates for DataTree coordinate inheritance ({issue}`331`, {pull}`333`) by [@aladinor](https://github.com/aladinor)
* ENH: Add ``optional_groups`` parameter (default ``False``) to all ``open_*_datatree()`` functions to control inclusion of ``/radar_parameters``, ``/georeferencing_correction``, and ``/radar_calibration`` subgroups ({issue}`331`, {pull}`333`) by [@aladinor](https://github.com/aladinor)
* ENH: Skip redundant station coordinate reads for subsequent sweeps in DataTree by passing ``site_as_coords=False`` and extracting shared ``_apply_site_as_coords`` helper ({issue}`334`, {pull}`337`) by [@aladinor](https://github.com/aladinor)
* ADD: Support list/tuple of chunk files (bytes, file-like, or paths) as input to ``open_nexradlevel2_datatree`` for streaming NEXRAD Level 2 data from S3 chunk buckets ({pull}`332`) by [@aladinor](https://github.com/aladinor)
* ADD: ``incomplete_sweep`` parameter (``"drop"``/``"pad"``) to ``open_nexradlevel2_datatree`` for handling incomplete sweeps in partial volume data ({pull}`332`) by [@aladinor](https://github.com/aladinor)
* ADD: Notebook example for streaming NEXRAD Level 2 chunks from S3 (``nexrad_read_chunks.ipynb``) ({pull}`332`) by [@aladinor](https://github.com/aladinor)
* ADD: Comprehensive test suite for chunk list-input and incomplete sweep handling ({pull}`332`) by [@aladinor](https://github.com/aladinor)
* ENH: Expose NEXRAD ICD scan metadata (AVSET/SAILS/MRLE/MPDA/BASE TILT flags, VCP sequencing, per-sweep waveform data) as FM301-compliant user-defined attributes ({issue}`338`, {pull}`339`) by [@aladinor](https://github.com/aladinor)
* FIX: Set indexes and wrap variables in CopyOnWriteArray for ODIM and GAMIC backends, fixes pickle error for `BufferedReader` ({issue}`189`) by [@Ockenfuss](https://github.com/Ockenfuss), ({pull}`345`) by [@kmuehlbauer](https://github.com/kmuehlbauer)
* FIX: Allow passing ``inherit`` parameter to ``apply_to_sweeps`` / ``map_over_sweeps`` to control coordinate inheritance from root node ({issue}`343`, {pull}`344`) by [@aladinor](https://github.com/aladinor)
* FIX: Use ``open-radar-data`` fixture as fallback for ``nexrad_read_chunks.ipynb`` notebook, replacing dependency on ephemeral S3 chunk data ({issue}`351`, {pull}`352`) by [@aladinor](https://github.com/aladinor)
* MNT: Pin ``open-radar-data>=0.6.0`` for NEXRAD chunk test data ({pull}`352`) by [@aladinor](https://github.com/aladinor)
* MNT: Transform ipynb notebooks to myst markdown notebooks ({issue}`342`, {pull}`348`) by [@kmuehlbauer](https://github.com/kmuehlbauer)
* DOC: Link WMO Manual on Codes in README.md ({issue}`308`, {pull}`353` ) [@kmuehlbauer](https://github.com/kmuehlbauer)

## 0.11.1 (2026-02-03)

* MNT: Pre-commit update + lint ({pull}`325`) by [@kmuehlbauer](https://github.com/kmuehlbauer)
* FIX: Use ``dtype`` with fallback in odim export ({pull}`324`) by [@katelbach](https://github.com/katelbach)
* FIX: Prevent azimuth-folding for RHI for gamic reader ({pull}`326`) by [@kmuehlbauer](https://github.com/kmuehlbauer)

## 0.11.0 (2026-01-12)

* ENH: get radar coordinates with given reference system ({issue}`243`) ({pull}`300`) by [@egouden](https://github.com/egouden)
* ENH: Disable fill value in rainbow reader ({issue}`103`) ({pull}`290`) by [@egouden](https://github.com/egouden)
* ADD: read nyquist_velocity in ODIM and GAMIC HDF5 files ({pull}`291`) by
  [@katelbach](https://github.com/katelbach)
* MNT: update and harden CI, add zizmor to precommit, add dependabot ({pull}`294`) by [@kmuehlbauer](https://github.com/kmuehlbauer)
* FIX: Return float32 for float types (keep other dtypes) and remove erroneous "units" from time attrs for hpl reader. ({issue}`296`) ({pull}`297`) by [@kmuehlbauer](https://github.com/kmuehlbauer)
* MNT: Fix Windows errors in file handling ({pull}`295`) by [@egouden](https://github.com/egouden)
* MNT: do not overwrite Dataset for Dataset.update ({pull}`302`) by [@kmuehlbauer](https://github.com/kmuehlbauer)
* FIX: Properly handle zero and NaN values during IRIS/Sigmet KDP decode. ({pull}`301`) by [@billvieux](https://github.com/billvieux)
* FIX: NEXRAD Level2 backend compatibility with older files and VCP-0 ({issue}`311`, {pull}`312`) by [@aladinor](https://github.com/aladinor)
* FIX: Add explicit `compat="no_conflicts",` to `xr.merge()` in `_get_subgroup` to silence xarray FutureWarning ({issue}`313`, {pull}`314`) by [@aladinor](https://github.com/aladinor).
* MNT: create individual notebook tests with pytest_generate_tests and use tmp_path-fixture ({pull}`316`) by [@kmuehlbauer](https://github.com/kmuehlbauer)
* FIX: Ensure backend closers are available ({pull}`318`) by [@kmuehlbauer](https://github.com/kmuehlbauer)
* MNT: Enhance contributing experience ({pull}`315`) by [@egouden](https://github.com/egouden)
* ENH: Add ``combine_sweeps`` function to stack sweeps into a single radar volume with optional time and angle filtering ({pull}`307`) by [@egouden](https://github.com/egouden)
* FIX: Use time-dimension to stack/unstack CfRadial1 data for variable number of gates, properly handle duplicates ({issue}`317`), ({pull}`320`) by [@kmuehlbauer](https://github.com/kmuehlbauer)

## 0.10.0 (2025-07-11)

* FIX: Use fixture for making temp file to avoid permission issue on Windows
* ENH: Supporting for streaming NEXRAD Level 2 data via file-like objects and byte streams. ({issue}`265`) ({pull}`280`) by [@aladinor](https://github.com/aladinor)
* ADD: function to select dataset variables in sweep ({issue}`104`) ({pull}`254`) by [@egouden](https://github.com/egouden)
* ADD: function to get dataset variables in sweep
* ADD: function to get metadata variables in sweep
* FIX: typo in accessors module: Dataarray -> Dataset
* FIX: Update missing deps for virtualenv environments via "requirements_dev.txt". ({issue}`253`) ({pull}`274`) by [@Steve-Roderick](https://github.com/Steve-Roderick).
* FIX: Prevent literal timedelta decoding for new xarray versions, fix tests, update pinnings ({pull}`278`) by [@kmuehlbauer](https://github.com/kmuehlbauer).
* MNT: Package and Documentation cleanup ({issue}`273`), {pull}`284`) by [@kmuehlbauer](https://github.com/kmuehlbauer).
* ADD: Support Universal Format (UF) ({issue}`275`) ({pull}`276`) by [@kmuehlbauer](https://github.com/kmuehlbauer).
* ADD: NDPointIndex Notebook example ({pull}`276`) by [@kmuehlbauer](https://github.com/kmuehlbauer).

## 0.9.0 (2025-02-07)

* ENH: Adding test to `open_datatree` function for all backends. Adding "scan_name" to nexradlevel2 datatree attributes ({pull}`238`) by [@aladinor](https://github.com/aladinor)
* FIX: Improving performance of `open_nexradlevel2_datatree` function and adding tests for `sweep` parameter. ({issue}`239`) ({pull}`240`) by [@aladinor](https://github.com/aladinor)
* FIX: Keeping attributes at each variable when using `open_nexradlevel2_datatree`. ({issue}`241`) ({pull}`242`) by [@aladinor](https://github.com/aladinor)
* FIX: Correctly read transition rays in RHI scans ({issue}`247`) ({pull}`250`) by [@rcjackson](https://github.com/rcjackson)
* FIX: Correctly open NEXRAD files when split cut mode is enable ({issue} `245`) ({pull}`246`) by [@aladinor](https://github.com/aladinor)
* ADD: Example Notebook for assigning geocoords. ({issue}`243`) and ({pull}`251`) by [@syedhamidali](https://github.com/syedhamidali)
* FIX: DataTree reader now works with sweeps containing different variables ({pull}`252`) by [@egouden](https://github.com/egouden).
* FIX: Correct retrieval of intermediate records in nexrad level2 reader ({issue}`259`) ({pull}`261`) by [@kmuehlbauer](https://github.com/kmuehlbauer).
* FIX: Test for magic number BZhX1AY&SY (where X is any number between 0..9) when retrieving BZ2 record indices in nexrad level2 reader ({issue}`264`) ({pull}`266`) by [@kmuehlbauer](https://github.com/kmuehlbauer).
* ENH: Add message type 1 decoding to nexrad level 2 reader ({issue}`256`) ({pull}`267`) by [@kmuehlbauer](https://github.com/kmuehlbauer).
* ENH: Introduce file locks for nexrad level2 and iris backend ({issue}`207`) ({pull}`268`) by [@kmuehlbauer](https://github.com/kmuehlbauer).


## 0.8.0 (2024-11-04)

This is the first version which uses datatree directly from xarray. Thus, xarray is pinned to version >= 2024.10.0.

* FIX: Convert volumes to_cfradial1 containing sweeps with different range and azimuth shapes, raise for different range bin sizes ({issue}`233`) by [@syedhamidali](https://github.com/syedhamidali), ({pull}`234`) by [@kmuehlbauer](https://github.com/kmuehlbauer).
* FIX: Correctly handle 8bit/16bit, big-endian/little-endian in nexrad reader (PHI and ZDR) ({issue}`230`) by [@syedhamidali](https://github.com/syedhamidali), ({pull}`231`) by [@kmuehlbauer](https://github.com/kmuehlbauer).
* ENH: Refactoring all xradar backends to use `from_dict` datatree constructor. Test for `_get_required_root`, `_get_subgroup`, and `_get_radar_calibration` were also added ({pull}`221`) by [@aladinor](https://github.com/aladinor)
* ENH: Added pytests to the missing functions in the `test_xradar` and `test_iris` in order to increase codecov in ({pull}`228`) by [@syedhamidali](https://github.com/syedhamidali).
* ENH: Updated Readme ({pull}`226`) by [@syedhamidali](https://github.com/syedhamidali).
* ADD: Added new module `transform` for transforming CF1 data to CF2 and vice versa ({pull}`224`) by [@syedhamidali](https://github.com/syedhamidali).
* Use DataTree from xarray and add xarray nightly run ({pull}`213`, {pull}`214`, {pull}`215`, {pull}`218`) by [@kmuehlbauer](https://github.com/kmuehlbauer).
* ADD: Added new accessor `map_over_sweeps` for volume operations on DataTrees and a matching decorator ({pull}`203`) by [@syedhamidali](https://github.com/syedhamidali).

## 0.7.0 (2024-10-26)

This is the last version which uses datatree from xarray-contrib/datatree. Thus, xarray is pinned to version 2024.9.0.

* ADD: Added `apply_to_sweeps` function for applying custom operations to all sweeps in a `DataTree` radar volume Implemented by [@syedhamidali](https://github.com/syedhamidali), ({pull}`202`).
* ADD: Metek Micro Rain Radar 2 reader by [@rcjackson](https://github.com/rcjackson), ({pull}`200`) by [@rcjackson](https://github.com/rcjackson).

## 0.6.5 (2024-09-20)

* FIX: Azimuth dimension now labelled correctly for Halo Photonics data ({pull}`206`) by [@rcjackson](https://github.com/rcjackson).
* FIX: do not apply scale/offset in datamet reader, leave it to xarray instead ({pull}`209`) by [@kmuehlbauer](https://github.com/kmuehlbauer).

## 0.6.4 (2024-08-30)

* FIX: Notebooks are now conforming to ruff's style checks by [@rcjackson](https://github.com/rcjackson), ({pull}`199`) by [@rcjackson](https://github.com/rcjackson).
* FIX: use dict.get() to retrieve attribute key and return "None" if not available, ({pull}`200`) by [@kmuehlbauer](https://github.com/kmuehlbauer)

## 0.6.3 (2024-08-13)

* FIX: use rstart in meter for ODIM_H5/V2_4 ({issue}`196`) by [@kmuehlbauer](https://github.com/kmuehlbauer), ({pull}`197`) by [@kmuehlbauer](https://github.com/kmuehlbauer).

## 0.6.2 (2024-08-12)

* FIX: Passing 'engine' kwarg in "open_cfradial1_datatree" method to enable fsspec.open when using url ({issue}`194`) by [@aladinor](https://github.com/aladinor), ({pull}`195`) by [@aladinor](https://github.com/aladinor)

## 0.6.1 (2024-08-07)

* MNT: minimize CI ({pull}`192`) by [@kmuehlbauer](https://github.com/kmuehlbauer).
* FIX: properly read CfRadial1 n_points files ({issue}`188`) by [@aladinor](https://github.com/aladinor), ({pull}`190`) by [@kmuehlbauer](https://github.com/kmuehlbauer).

## 0.6.0 (2024-08-05)

* ADD: DataMet reader ({pull}`175`) by [@wolfidan](https://github.com/wolfidan).
* FIX: Nexrad level2 time offset of 1 day, skip reading missing elevations, introduce new radial_status of 5
 ({issue}`180`) by [@ghiggi](https://github.com/ghiggi), ({pull}`180`) by [@kmuehlbauer](https://github.com/kmuehlbauer).
* ADD: Reader for Halo Photonics Doppler lidar data by [@rcjackson](https://github.com/rcjackson)

## 0.5.1 (2024-07-05)

* ADD: Add Alfonso to citation doc ({pull}`169`) by [@mgrover1](https://github.com/mgrover1).
* ENH: Adding global variables and attributes to iris datatree ({pull}`166`) by [@aladinor](https://github.com/aladinor).
* FIX: Set fillvalue before applying scale/offset when exporting to odim ({issue}`122`) by [@pavlikp](https://github.com/pavlikp), ({pull}`173`) by [@kmuehlbauer](https://github.com/kmuehlbauer).
* FIX: Fix use of ruff, CI and numpy2 ({pull}`177`) by [@mgrover1](https://github.com/mgrover1) and [@kmuehlbauer](https://github.com/kmuehlbauer).

## 0.5.0 (2024-03-28)

* MNT: Update GitHub actions, address DeprecationWarnings ({pull}`153`) by [@kmuehlbauer](https://github.com/kmuehlbauer).
* MNT: restructure odim.py/gamic.py, add test_odim.py/test_gamic.py ({pull}`154`) by [@kmuehlbauer](https://github.com/kmuehlbauer).
* MNT: use CODECOV token ({pull}`155`) by [@kmuehlbauer](https://github.com/kmuehlbauer).
* MNT: fix path for notebook coverage ({pull}`157`) by [@kmuehlbauer](https://github.com/kmuehlbauer).
* ADD: NEXRAD Level2 structured reader ({pull}`158`) by [@kmuehlbauer](https://github.com/kmuehlbauer) and [@mgrover1](https://github.com/mgrover1).
* FIX: Add the proper elevation angle to fixed angle ({pull}`162`) by [@mgrover1](https://github.com/mgrover1).
* ENH: Add a utility for finding sweep number keys ({pull}`167`) by [@mgrover1](https://github.com/mgrover1).

## 0.4.3 (2024-02-24)

* MNT:  address black style changes, update pre-commit-config.yaml ({pull}`152`) by [@kmuehlbauer](https://github.com/kmuehlbauer).
* FIX: use len(unique) to estimate unique entry for odim range ({pull}`151`) by [@martinpaule](https://github.com/martinpaule).

## 0.4.2 (2023-11-02)

* FIX: Fix handling of sweep_mode attributes ({pull}`143`) by [@mgrover1](https://github.com/mgrover1)
* FIX: explicitely check for "False" in get_crs() {pull}`142`) by [@kmuehlbauer](https://github.com/kmuehlbauer).

## 0.4.1 (2023-10-26)

* FIX: Add history to cfradial1 output, and fix minor error in CfRadial1_Export.ipynb notebook({pull}`132`) by [@syedhamidali](https://github.com/syedhamidali)
* FIX: fix readthedocs build for python 3.12 ({pull}`140`) by [@kmuehlbauer](https://github.com/kmuehlbauer).
* FIX: align coordinates in backends, pin python >3.9,<=3.12 in environment.yml ({pull}`139`) by [@kmuehlbauer](https://github.com/kmuehlbauer)
* FIX: prevent integer overflow when calculating azimuth in FURUNO scn files ({issue}`137`) by [@giacant](https://github.com/giacant) , ({pull}`138`) by [@kmuehlbauer](https://github.com/kmuehlbauer)

## 0.4.0 (2023-09-27)

* ENH: Add cfradial1 exporter ({issue}`124`) by [@syedhamidali](https://github.com/syedhamidali), ({pull}`126`) by [@syedhamidali](https://github.com/syedhamidali)
* FIX: use datastore._group instead of variable["sweep_number"] ({issue}`121`) by [@aladinor](https://github.com/aladinor) , ({pull}`123`) by [@kmuehlbauer](https://github.com/kmuehlbauer)
* MIN: use "crs_wkt" instead of deprecated "spatial_ref" when adding CRS ({pull}`127`) by [@kmuehlbauer](https://github.com/kmuehlbauer)
* FIX: always read nodata and undetect attributes from ODIM file ({pull}`125`) by [@egouden](https://github.com/egouden)
* MIN: use `cmweather` colormaps in xradar ({pull}`128`) by [@kmuehlbauer](https://github.com/kmuehlbauer).

## 0.3.0 (2023-07-11)

* ENH: Add new examples using radar data on AWS s3 bucket ({pull}`102`) by [@aladinor](https://github.com/aladinor)
* FIX: Correct DB_DBTE8/DB_DBZE8 and DB_DBTE16/DB_DBZE16 decoding for iris-backend ({pull}`110`) by [@kmuehlbauer](https://github.com/kmuehlbauer)
* FIX: Cast boolean string to int in rainbow dictionary ({pull}`113`) by [@egouden](https://github.com/egouden)
* MNT: switch to mamba-org/setup-micromamba, split CI tests ({issue}`115`), ({pull}`116`) by [@kmuehlbauer](https://github.com/kmuehlbauer)
* FIX: time interpolation ({pull}`117`) by [@kmuehlbauer](https://github.com/kmuehlbauer)
* FIX: robust ``angle_res`` retrieval in ``extract_angle_parameters`` ({issue}`112`), ({pull}`118`) by [@kmuehlbauer](https://github.com/kmuehlbauer)
* FIX: robust radar identifier in ``to_odim()`` ({pull}`120`) by [@kmuehlbauer](https://github.com/kmuehlbauer)

## 0.2.0 (2023-03-24)

* ENH: switch to add optional how attributes in ODIM format writer ({pull}`97`) by [@egouden](https://github.com/egouden)
* FIX: add keyword argument for mandatory source attribute in ODIM format writer ({pull}`96`) by [@egouden](https://github.com/egouden)
* FIX: check for dim0 if not given, only swap_dims if needed ({issue}`92`), ({pull}`94`) by [@kmuehlbauer](https://github.com/kmuehlbauer)
* FIX+ENH: need array copy before overwriting and make compression available in to_odim ({pull}`95`) by [@kmuehlbauer](https://github.com/kmuehlbauer)

## 0.1.0 (2023-02-23)

* Add an example on reading multiple sweeps into a single object ({pull}`69`) by [@mgrover1](https://github.com/mgrover1)
* ENH: add spatial_ref with pyproj when georeferencing, add/adapt methods/tests ({issue}`38`), ({pull}`87`) by [@kmuehlbauer](https://github.com/kmuehlbauer)
* Docs/docstring updates, PULL_REQUEST_TEMPLATE.md ({pull}`89`) by [@kmuehlbauer](https://github.com/kmuehlbauer)
* Finalize release 0.1.0, add testpypi upload on push to main ({pull}`91`) by [@kmuehlbauer](https://github.com/kmuehlbauer)

## 0.0.13 (2023-02-09)

* FIX: only skip setting cf-attributes if both gain and offset are unused ({pull}`85`) by [@kmuehlbauer](https://github.com/kmuehlbauer)

## 0.0.12 (2023-02-09)

* ENH: add IRIS ``DB_VELC`` decoding and tests ({issue}`78`), ({pull}`83`) by [@kmuehlbauer](https://github.com/kmuehlbauer)
* FIX: furuno backend inconsistencies ({issue}`77`), ({pull}`82`) by [@kmuehlbauer](https://github.com/kmuehlbauer)
* FIX: ODIM_H5 backend inconsistencies ({issue}`80`), ({pull}`81`) by [@kmuehlbauer](https://github.com/kmuehlbauer)

## 0.0.11 (2023-02-06)

* fix ``_Undetect``/``_FillValue`` in odim writer ({pull}`71`) by [@kmuehlbauer](https://github.com/kmuehlbauer)
* port more backend tests from wradlib ({pull}`73`) by [@kmuehlbauer](https://github.com/kmuehlbauer)

## 0.0.10 (2023-02-01)

* add WRN110 scn format to Furuno reader ({pull}`65`) by [@kmuehlbauer](https://github.com/kmuehlbauer)
* Adapt to new build process, pyproject.toml only, use `ruff` for linting ({pull}`67`) by [@kmuehlbauer](https://github.com/kmuehlbauer)

## 0.0.9 (2022-12-11)

* add ODIM_H5 exporter ({pull}`39`) by [@kmuehlbauer](https://github.com/kmuehlbauer)
* fetch radar data from open-radar-data ({pull}`44`) by [@kmuehlbauer](https://github.com/kmuehlbauer)
* align readers with CfRadial2, add CfRadial2 exporter ({pull}`45`), ({pull}`49`), ({pull}`53`), ({pull}`56`), ({pull}`57`) and ({pull}`58`) by [@kmuehlbauer](https://github.com/kmuehlbauer)
* add georeference accessor, update examples ({pull}`60`), ({pull}`61`) by [@mgrover1](https://github.com/mgrover1)
* refactored and partly reimplemented angle reindexing ({issue}`55`), ({pull}`62`) by [@kmuehlbauer](https://github.com/kmuehlbauer)

## 0.0.8 (2022-09-28)

* add GAMIC HDF5 importer ({pull}`29`) by [@kmuehlbauer](https://github.com/kmuehlbauer)
* add Furuno SCN/SCNX importer ({pull}`30`) by [@kmuehlbauer](https://github.com/kmuehlbauer)
* add Rainbow5 importer ({pull}`32`) by [@kmuehlbauer](https://github.com/kmuehlbauer)
* add Iris/Sigmet importer ({pull}`33`) by [@kmuehlbauer](https://github.com/kmuehlbauer)
* add georeferencing (AEQD) ({pull}`28`) by [@mgrover1](https://github.com/mgrover1)

## 0.0.7 (2022-09-21)

* Add zenodo badges to README.md ({pull}`22`) by [@mgrover1](https://github.com/mgrover1)
* Fix version on RTD ({pull}`23`) by [@kmuehlbauer](https://github.com/kmuehlbauer)
* Add minimal documentation for Datamodel ({pull}`24`) by [@kmuehlbauer](https://github.com/kmuehlbauer)

## 0.0.6 (2022-09-19)

* Improve installation and contribution guide, update README.md with more badges, add version and date of release to docs, update install process ({pull}`19`) by [@kmuehlbauer](https://github.com/kmuehlbauer)
* Add minimal documentation for CfRadial1 and ODIM_H5 importers ({pull}`20`) by [@kmuehlbauer](https://github.com/kmuehlbauer)
* Add accessors.py submodule, add accessors showcase  ({pull}`21`) by [@kmuehlbauer](https://github.com/kmuehlbauer)

## 0.0.5 (2022-09-14)

* Data Model, CfRadial1 Backend ({pull}`13`) by [@kmuehlbauer](https://github.com/kmuehlbauer)
* ODIM_H5 Backend ({pull}`14`) by [@kmuehlbauer](https://github.com/kmuehlbauer)

## 0.0.4 (2022-09-01)

Setting up CI workflow and build, [@mgrover1](https://github.com/mgrover1) and [@kmuehlbauer](https://github.com/kmuehlbauer)

## 0.0.1 (2022-09-01)

* First release on PyPI.